What Should I Do When My Toilet Runs Until I JIGGLE The Handle?

There are a few things you can do when your toilet runs until you jiggle the handle. One way is to clean the mounting nut for the handle on the inside of the tank available via Candu Plumbing of Thousand Oaks. If this is not working, you can also jiggle the handle.

Fixing a loose toilet handle

If you notice that your toilet handle has become loose, you may need to replace it. To do so, you will first have to remove the old handle. Next, you will need to unscrew the nut that connects the handle to the tank. Be careful not to turn the nut too tight or too loose because it may break the porcelain. After you have unscrewed the nut, you can bring the old handle to a hardware store and purchase a new one. Be sure to buy one that matches the model of your toilet.

Most toilet handles are quite simple to fix. If you can’t figure out how to do it yourself, you can contact a plumber for help. They can perform the repair for you or can perform other maintenance on your plumbing. If you’re unsure of your plumbing abilities, it’s always best to call a professional plumber to check and fix the problem.

Usually, a loose toilet handle can be easily fixed by disengaging the chain that connects the flapper and the handle. The nut can be unscrewed by loosening it with a wrench. If you’re not sure about how to unscrew it, you can turn the nut counterclockwise or clockwise. If you don’t use the correct tools, however, you might damage your toilet tank and cause more damage.

Once you’ve removed the loose lever, you should turn the water supply handle counterclockwise to turn it on. After you’ve turned on the water supply, flush the toilet to ensure it is working correctly. After you’ve completed this, you can try installing the lever again. After that, you can replace the handle if it’s not working properly.

Another cause of loose toilet handles is when the flush lever has become detached from the flush lever. This lever is a small plastic or metal stick that attaches to the flapper valve at the bottom of the tank. In some cases, the flush lever may be damaged, so it’s important to replace it. Fortunately, the repair can be done easily and quickly.

If you’re unable to fix the problem yourself, you should call a plumber in Thousand Oaks. These plumbers have the proper tools and experience to handle any loose toilet handle issues. The plumber‘s expertise may help you make a more permanent repair.

Cleaning the mounting nut for the handle on inside of the tank

If the handle doesn’t open when you try to flush the toilet, the problem may be with the mounting nut or with the chain that connects the handle to the flapper. If the chain is broken or cracked, it may need to be reattached. You should also check the nut, which may have become overtightened. This can strip the threads and crack the porcelain tank.

A dirty mounting nut can prevent the handle from releasing smoothly, which can waste water. It is best to take it off by hand if possible. Ensure the tank is turned off before removing the nut. Once the mounting nut is removed, you can install a new handle. The new handle should match the position of the old one.

Candu Plumbing & Rooter
22144 Eccles St, Canoga Park, CA 91304
(855) 522-2638